Pre-dispersion Rubber Masterbatches

• Pre-dispersion Rubber Masterbatches S-80

  Composition: 80% sulphur, 20% binder EPDM based
  Appearance: yellow granules
  Density, 20 °C: approx. 1.62 g/cm3
  Sulphur content: min. 99.5 %
  

  view more
• Pre-dispersion Rubber Masterbatches DTDM-80

  Appearance: White granular
  Density: 1.11-1.21g/cm³
  Ash: 4.0%Max
  

  view more
• Pre-dispersion Rubber Masterbatches CBS-80

  Appearance: Grayish-white granular
  Main component content: 80±2%
  Mooney viscosity (at 50℃): 30-70ML(1+4)
  Density: 1.10±0.15g/cm³
  

  view more
• Pre-dispersion Rubber Masterbatches MBTS-80

  Active Content(%): 80
  Appearance: Beige to yellow granules
  Carrier: SBR
  Sulfur Content: 30.0
  Density(g/Cm³): 1.27
  

  view more
• Pre-dispersion Rubber Masterbatches TBBS

  Appearance: White to gray-white granularr
  Main component content: 80±2%
  Mooney viscosity(50℃): 40-80ML(1+4)
  Density: 1.13±0.15g/cm³
  

  view more
• Pre-dispersion Rubber Masterbatches Zno-80

  Choiceness ZnO is suitable for rubber industry, combined with elastomer that can avoid absorbing moisture in the air in storage. Compared to what contains ZnO powders,the extruded products which...

  view more
• Pre-dispersion Rubber Masterbatches CTP-80

  Activeingredient CTPi avulcanization retarderof nature rubber and diene rubbers, which can unnoticeably prolong total vulcanizing time. It can improve processing safety and not impact properties...

  view more
• Pre-dispersion Rubber Masterbatches HMT-80

  The crosslinking efficiency is high, which can significantly improve the rubber's set-stretch stress, hardness and heat aging resistance. The pre-dispersed particles have a fast feeding speed, and...

  view more
• Pre-dispersion Rubber Masterbatches SI69-50

  Si69 bonding with highly dispersed filler such as silica, on the other side bonding with rubber, it has excellent properties of dynamic and static after vulcanization. Si69 significantly reduce...

  view more